Connection Points - Bosch rexroth IndraDrive HMS01 Manual Del Usuario

IndraDrive Drive Controllers Power Sections HMS01
4.2.2

Connection points

Symbols used to describe the connection points
Screw terminal block
Connection point HMS01
X5
A
B
C
D
E
X6 A, B, C, D, E
24V, 0V A, B, C, D, E
L+, L-
For proper function of the motor thermal management connect the motor
thermal sensor as described in the wiring diagram. Otherwise motor
overtemperature sensing is not provided by the drive.
For Rexroth motors with data memory in the motor encoder, such as MSK,
the motor overload protection level is set automatically while connecting the
motor to the drive. There is no adjustment necessary. Otherwise refer to the
Rexroth firmware documentation.
Spring terminal
Tab. 4-1: Symbols
1)
2)
3)
4)
5)
Thread Max. connection cross
section
mm 2 (AWG)
4,0 (10)
16,0 (6)
M6
1×16; 1×25; 1×35
2×16; 2×25; 2×35
(1×6; 1×4; 1×2; 1×1
2×6; 2×4; 2×2; 2×1)
M6
1×16; 1×25; 1×35; 1×50
2×16; 2×25; 2×35; 2×50
(1×6; 1×4; 1×2; 1×1
2×6; 2×4; 2×2; 2×1)
M10
1×16; 1×25; 1×35; 1×50; 1×70; 1×120
2×16; 2×25; 2×35; 2×50; 2×70; 2×120
(1×6; 1×4; 1×2; 1×1; 1×1/0; 1×2/0; 1×4/0
2×6; 2×4; 2×2; 2×1; 2×1/0; 2×2/0; 2×4/0)
1,5 (16)
M6
R911319996_Edition 08 Bosch Rexroth AG
21/27
Instructions for use
Max. tightening torque
Nm
0,6
1,7
6,5
6,5
20
-
6,5