SilverStone Sugo SG10 Manual De Instrucciones página 3

SUGO SG10 SUGO SG10
Redefining performance in small form factor com Redefining performance in small form factor computing
Material
Model
Motherboard
Drive Bay
Cooling System
Expansion Slot
Front I/O Port
Power Supply
Expansion Card
Dimension
Extra
*If you intend to utilize all hard drive slots, please remove all unused power supply cables.
These unused cables may cause problem with the installation. SSDs are highly recommended
in place of hard drives.
* Maximum length for PSU is 180mm, we recommend 160mm due to varying connector locations
on PSUs and the unique structure of SG10. We do not promise that all retail PSUs on the market
can be installed in the SG10. Please refer the guides provided in this manual to select your PSU.
Aluminum front panel, Steel body
SST-SG10B (black)
Micro ATX, Mini-DTX, Mini-ITX
12.7mm/9.5mm slim optical x 1
Exposed
3.5" x 2 * , 2.5" x4*
Internal
Rear 1 x 120mm 1200rpm 22dBA
Top 180mm Air Penetrator 600/900/1200rpm, 17/25/34dBA
(backward compatible with 140mm)
1 x 120mm 1200rpm 22dBA(backward compatible with 92mm)
Left
2*80/92mm fan slot
Right 80mm fan slot
4
USB 3.0 x 2 、audio x 1、MIC x 1
Optional standard PS2(ATX) up to 180mm*
Compatible up to 13.3" long, width restriction-5.70"
354mm (D) x 220mm (W) x 295mm (H), 23 liters
Support two Kensington locks
2