Initial Cleaning; Safety Shutoff; Residual Heat - Dacor DTI36M977BB Manual Del Usuario

Initial cleaning

Before using the cooktop for the first time, clean the ceramic glass surface with a damp
cloth and ceramic cooktop glass cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface can be damaged.

Safety shutoff

• If the cooktop overheats because of an abnormal operation, 'C1' will be displayed, and
the cooktop will turn off.
• If unsuitable or excessively small-sized cookware is put on a cooking zone, or no
cookware has been placed on a cooking zone, the cooktop will turn off automatically.
• If either of the above happen, clean the control panel and turn the cooktop on again.
To turn the cooktop off
NZ9500K_MOD_DTI36M977BB_DG68-00899A-02_EN+MES+CFR.indb 25

Residual Heat

To turn the cooktop off, press POWER
again. After the cooktop is turned
off, residual heat may remain with
a corresponding indicator on the
corresponding cooking zone.
See page 22 for details.
English 25
2017-08-01 12:01:18