Correct Positioning - Dacor DTI36M977BB Manual Del Usuario

Before you start

Correct positioning

Flat-bottomed cookware and straight sides
The cookware meets or exceeds the
recommended minimum size for the
cooking zone.
The cookware rests completely on the
cooktop surface.
The cookware is properly balanced.
NOTE
Any one of the incorrect conditions listed above may be detected by the sensors located
below the cooktop surface. If the cookware does not meet all of these conditions, one or
more of the cooking zones will not heat.
30 English
NZ9500K_MOD_DTI36M977BB_DG68-00899A-02_EN+MES+CFR.indb 30
Correct Incorrect
Cookware with curved or warped bottoms
or sides
The cookware does not meet the minimum
size required for the current cooking zone.
The cookware rests on the cooktop trim or
does not rest completely on the cooktop
surface.
The heavy handle causes the cookware to
tilt.
2017-08-01 12:01:19