Siemens SITRANS F FUS1020 IP65 NEMA 4 Instrucciones De Servicio Resumidas página 20

Commissioning
3.3 Setting the Parameters
① Site name filed is initially blank
② (?) indicates cell is ready to accept data. Cursor shown in first character position.
Note
To set English or Metric units: In Meter Type Menu, scroll to Meter Facilities Menu. Press
<Right Arrow> and select desired units. Press <ENTER> to select. Press <Left Arrow>
and <Up Arrow> keys to return to Meter Type Menu.
Note
To select alpha-numeric characters: Press <Right Arrow> to cursor and then press
<Up/Down Arrow> keys to select letters and numbers.
5. Press <Left Arrow> key and return to [Channel Setup]. Press <Down Arrow> to select
Select Pipe Class
1. Press <Right Arrow> key to select [Pick Pipe Class].
2. Press <Right Arrow> key again. Press the <Up/Down Arrow> keys to scroll to desired
3. Press <ENTER> key to select Pipe Class.
4. Press <Right Arrow> key. Press <Up/Down Arrow> keys to scroll to select desired Pipe
5. Press <ENTER> key to save Pipe Size selection.
18
[Pipe Data].
Pipe Class.
Size.
SITRANS FUS1020 IP65 NEMA 4 Quick Start
Operating Instructions (Compact), 4/2009, CQO:QSG006 Revision B