White Bal - Samsung SCC-C6433 Manual Del Usuario

WHITE BAL

Lights are generally denoted as color temperatures and expressed in Kelvin (K) units.
The general light color temperatures are shown below.
You can select one of four modes for white balance adjustment as follows:
- ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is
monitored continuously and thereby white balance is set automatically. The following are the
approximate supported color temperature ranges in these modes.
ATW1 : 2500K ~ 9300K(*1)
ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(*2)
*1. If the color temperature is out of this range in ATW1 mode, proper white balance may not be
obtained. In that case, select ATW2 mode.
*2. In ATW2 mode, if one color is dominated in the shot area, the color can be displayed
differently. Therefore, select the mode which is appropriate for the environment.
- AWC8 (Auto-Tracing White Balance Control): In this mode, accurate white balance is obtained
by pressing the ENTER while having a white paper in front of the camera. White Balance data
will be maintained after set it once. AWC mode is best in locations where the color temperature
of light source is constant.
8
10000K
Blue sky
Rainy
9000K
8000K
Cloudy
7000K
6000K
Sunny
5000K
4000K
3000K
Halogen lamp
2000K
Candlelight
1000K
Partly Cloudy
Fluorescent lamp
Tungsten lamp