POSITION SET
From "POSITION SET..." press the ENTER key to get into the PAN/TILT, FOCUS/ZOOM SET
screen to set the PAN/TILT location and FOCUS/ZOOM condition then press the ENTER key to
return to a upper menu.
PRESET ID
This is the ID set up function for each PRESET. It can be set up to 12 characters using the left,
right, up, and down keys. The ID location can be set in the submenu of "LOCATION..."
VIDEO SET
This is the screen setting function for each PRESET. For more details, refer to the descriptions
in [VIDEO SET] menu.
PRESET SPEED
This function sets up the speed of PAN or TILT by 8 steps from 1(SLOW) to 8(FAST).
- PRESET SPEED 1 : Maximum PAN moving speed of 240°/sec
- PRESET SPEED 8 : Maximum PAN moving speed of 400°/sec
DWELL TIME
This is a function setting for the DWELL TIME of the PRESET location in "SCAN" motion. It can
set DWELL TIME From 1 ~ 60 Sec.
IMAGE HOLD
Pause the image when PRESET is in movement. If you set the [IMAGE HOLD] menu to [ON],
the screen will be paused until PRESET finishes moving.