Other Set; Proportional P/T; Turbo P/T; Auto Cal - Samsung SCC-C6433 Manual Del Usuario

Other set

❚
** MAIN MENU **
CAMERA SET...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
CLOCK SET...
SYSTEM INFO...

PROPORTIONAL P/T

This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual
operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase
in the ZOOM WIDE mode and decrease in the ZOOM TELE mode even in the same manual
operation.

TURBO P/T

This function doubles up the speed of PAN/TILT movement by manual operation of PAN/TILT.
The speed may go up to 180°/sec (PAN).

AUTO CAL.

This function turns on or off Auto Calibration. SCC-C6435(P)/6433(P) has the Auto Calibration
function to improve the precision of LENS and PAN/TILT motor. You may set to OFF/6H/12H/
18H/24H. Without user's key input for the time designated by the user, A.C. will appear on the
screen while initializing LENS and PAN/TILT.
(OTHER SET)
PROPORTIONAL P/T ON
TURBO P/T OFF
AUTO CAL. OFF
D-FLIP OFF
CAM RESET ...
LANGUAGE ENGLISH
PASSWORD OFF
RS-485 ...
EXIT QUIT
6