Fitting Mechanical Components - Festo VDMA-02 Serie Manual De Instrucciones

2 Fitting the valve terminal

2.1 Fitting mechanical components

Please note
Uneven surfaces result in leakage of the valve terminal.
S Make sure that the valve terminal is fitted on an even
surface (on a steel plate, for example).
Permissible tightening torques for valve linking and valve
fitting (VDMA valve type MN2H... and JMN2H...):
VDMA02: 0.6 Nm
2.0 Nm ± 25%
16
KMEB: 0.5 Nm
Festo VDMA−02−ZR.. 0403a English