Operation And Maintenance; Operation - Astralpool 66548 Manual De Instalación, Operación Y Mantenimiento

Install antivibration sleeves ⑤
component breakage due to vibrations.
Install a gate valve ⑥
the curtain inlet, avoiding hydraulic circuit discharge when stopping the system.
Install a gate valve ⑥
Install a filtration and water treatment system ⑩
proper filtration and water treatment of the digital curtain's pool/tank. The water
softener is necessary to avoid water calcium deposits in the nozzles and/or fast effect
electrovalves, decreasing maintenance tasks.
Install shut-off valves ⑫
WARNING:
Risk of unit
unit up. This operation must be done before the starting up of the digital curtain to
avoid pushing solids that could clog components.
WARNING:
Risk of unit
adequated to flow and pressure.
WARNING: Check differential pressure periodically with manometer ⑨
know filter cleaning necessity and ensure the hydraulic supply to the digital curtain.
WARNING: Protect the water outlet from the wind and do not operate in strong wind.
If the unit is installed in a windy area, water outlet could be often displaced.
2.2.2 Electrical
WARNING: Risk of unit damage. Check that all IP68 connectors are properly sealed
and they prevent water getting through. Electrical components may become
damaged by flooding, causing the unit warranty loss.
Use a properly sized 230 VAC wire for total curtain power, with a maximum of 4
segments per main supply wire (960W).
Every power line must be protected with a 30mA differential circuit breaker and a
magnetothermal circuit breaker, located in a control panel.
Plug the Ethernet connection of the digital curtain to a computer. Computer not
included on the equipment.
3

OPERATION AND MAINTENANCE

3.1

OPERATION

The operation of the unit will depend on the control system installed, which is not
supplied with this unit.
INSTALLATION, OPERATION AND MAINTENANCE MANUAL; DIGITAL
CURTAIN
⑤ in every water inlet (D75) and a relief (D50), to avoid
⑤ ⑤
⑥ and a check valve ⑦
⑥ ⑥
⑥ to adjust flow and pressure on relief's return.
⑥ ⑥
⑫ to make maintenance tasks on hydraulic devices easier.
⑫ ⑫
damage. Clean all piping prior to connecting and starting the
damage. Install a 130 m filter ⑧
⑦ in order to adjust flow and pressure at
⑦ ⑦
⑩ with a water softener ⑪
⑩ ⑩
⑧ before water inlet
⑧ ⑧
[en]
Fountain Units
⑪ , for a
⑪ ⑪
⑨ in order to
⑨ ⑨
19