Software Running; Manual Test; Maintenance - Astralpool 66548 Manual De Instalación, Operación Y Mantenimiento

[en]
Fountain Units
3.2

SOFTWARE RUNNING

3.2.1

Manual Test

Select "Manual Testing" tab for executing a specific image with a color, browse over
the files and select the figure (fig 4).
Once selected, follow same steps to select color. Click "Load" to apply changes and
"Play" to run them.
When "Play" is clicked, image and color will be shown on curtain (fig.5)
3.2.2 Automatic Playlist
Select "Playlist Manager" tab, click "New" at the bottom and write a name for your
playlist (fig 6).
Select choosen images on the appropriate folders and drag them to the timeline.
To select a created color sequence (DMX light file), choose a sequence on the
appropriate folder and drag it to the timeline called "DMX Program" (fig 7).
To play only one color, go to "Color" band and press the small square on the right
part of the band, then select desired color (fig 8).
Finally, click on "Save" to save playlist.
Use "test playlist" for testing playlists manually.
Use "Timetables" tab to generate scheduled digital curtain plays, introducing day,
starting time, ending time and adding desired playlists on the scheduled time
generated.
3.3

MAINTENANCE

For the maintenance of the components made of stainless steel, see the manual
attached.
Check the state of the water supply filter to the digital curtain with the necessary
periodicity according to the installation conditions (minimum every week), to carry
out the cleaning if necessary. Make use of the differential manometer to check the
filter state.
Check weekly the filtration equipment state and water treatment of the pool / tank,
to ensure the correct hydraulic supply to the digital curtain, with the indicated
parameters and avoiding calcium excess in water.
Switch on the digital curtain at least once a week for 2 hours, to avoid water solid
deposits in the internal components.
20
INSTALLATION, OPERATION AND MAINTENANCE MANUAL; DIGITAL
CURTAIN