Electrical Installation - SICK GTE6L Instrucciones De Operación

6

Electrical installation

8025471.1AR6 / 21.02.2021 | SICK
Subject to change without notice
Figure 1: Sensor orientation relative to object direction
The sensors must be connected in a voltage-free state (U
tion must be observed depending on the connection type:
– Plug connection: pin assignment
– Cable: wire color
Only apply voltage/switch on the voltage supply (U
tions have been established.
Explanation of connection terminology:
BN = Brown
WH = White
BU = Blue
BK = Black
n. c. = no connection
Q = switching output 1
Q = switching output 2
L+ = supply voltage (Uv)
M = common
L.ON = light operate
D.ON = dark operate
ELECTRICAL INSTALLATION
= 0 V). The following informa‐
V
> 0 V) once all electrical connec‐
V
6
7