GRAPHITE 58G971 Manual De Instrucciones página 13

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT
FOR FUTURE REFERENCE.
● Whenever working tool can hit hidden electric wires or its own power cord during operation, hold the
power tool only by insulated surfaces of the handle. Contact with power supply line may transfer its
voltage to metal parts of the power tool and cause electric shock.
● Keep hands at safe distance from the cutting area. Do not put them under processed piece. Contact
with blade may cause injury.
● Switch off the power tool after work. Remove blade from processed piece only when it is at standstill.
This way you can avoid recoil and it is possible to safely put away the power tool.
● Use only undamaged blades in good technical condition. Bent, blunt blades may break, additionally
may affect cutting line and contribute to or cause recoil.
● Dust of certain wood and metal types may be dangerous to health and cause allergic reactions,
respiratory tract illness or be carcinogenic.
– Use dust masks when cutting to protect your respiratory system against produced dust.
– Use dust extraction system when cutting wood.
– Always provide good ventilation of your workplace.
● Do not cut water system pipes with the power tool. Cutting a pipe may cause material damages or
electric shock.
● Carefully check the processed material before cutting to eliminate possibility of cutting nails, bolts, or
other hard objects.
● Do not cut objects thicker than allowed in technical specification for a given material.
● Hold the power tool in a closed hand.
● Ensure the power tool does not have contact with the material before pressing the switch.
● Do not touch moving parts with your hand.
● Do not put away the power tool until it stops moving.
● Do not switch the power tool on when not holding it.
● Do not touch the blade or processed material immediately after the work has been finished. Those
elements may be hot and may cause burns.
● When you see unusual behaviour of the tool or hear strange noises, immediately switch off the tool and
remove the plug from mains socket.
● To ensure proper cooling keep ventilation holes in the power tool body unobstructed.
● Before connecting the power tool to mains socket make sure the supply voltage matches the voltage
on the rating plate of the tool.
● Each time before connecting the power tool check the power cord, in case of damage hand over to
authorized workshop for replacement.
● Power cord of the power tool always must be on the safe side, where there is no danger of accidental
damage by operating power tool.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of injuries at work.
RECIPROCATING SAW
58G971
DETAILED SAFETY REGULATIONS
13