Heat Setting Displays; Optiheat Control (3 Step Residual Heat Indicator) - Electrolux EIV85443 Manual De Instrucciones

Sensor Function
field
PowerBoost
9
10 - Control bar
-
11
-
12
/
- Control bar
13

4.3 Heat setting displays

Display
-
+ digit
/ /
/ /
4.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ /
indicator is on, there is a risk of
burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
10 ENGLISH
Description
The cooking zone is deactivated.
The cooking zone operates.
Automatic Heat Up operates.
PowerBoost operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐
ual heat.
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
PowerSlide operates.
As long as the
Comment
To activate and deactivate the function.
To set a heat setting.
To select the cooking zone.
To increase or decrease the time.
To set the heat setting for flexible induction cooking
area.
The indicators
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even
if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
/ / appear when a