Heat Setting Displays; Residual Heat Indicator; Daily Use - Electrolux EHH6332FOK Manual De Instrucciones

Sensor field
A heat setting display.
6
7
8
9
10

3.2 Heat setting displays

Display
-

3.3 Residual heat indicator

WARNING!
heat!

4. DAILY USE

4.1 Activation and deactivation
Touch
activate the appliance.
4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All cooking zones are deactivated (
).
/
The cooking zone is deactivated.
Keep warm / STOP+GO function operates.
The cooking zone operates.
/ -
Automatic Heat Up function operates.
Not correct cookware or too small cookware or no cook-
ware on the cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
Power function operates.
The Automatic Switch Off operates.
The risk of burns from residual
for 1 second to activate or de-
Function
To show the heat setting.
To activate the Power function.
To select a cooking zone.
To increase or decrease the time.
To activate and deactivate the STOP+GO
function.
Description
The induction cooking zones make the
heat necessary for cooking directly in the
bottom of the cookware. The glass ce-
ramic is hot from the heat of the cook-
ware.
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds some time and
the appliance deactivates. Remove the
object or clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before
you use the appliance again, the cook-
ing zone must be cool.
ENGLISH 7