cecotec BAKE&STEAM 3000 COMBI Manual De Instrucciones página 25

ENGLISH
time and temperature are 30 min and 180 ºC.
Rotate the knob to set the time, from 1 minute to 2 hours. Press the knob to confirm. Rotate
the knob to set the temperature from 100 ºC to 230 ºC. Once both time and temperature are
set, press the Start/Pause knob to start operation.
When it starts grilling, the Preheating icon will light up indicating the preheating cycle has
begun. When preheating is finished, the Preheating icon will turn off and the device will
beep 10 times indicating food can be introduced in the oven. The device will start grilling
automatically.
Grill & steam
Fig. 5.
This function mainly consists of grilling, and during grilling, the oven generates some steam,
so food is well done and tender at the same time. The default time and temperature are 30
min and 180 ºC.
Rotate the knob to set the time, from 1 minute to 2 hours. Press the knob to confirm. Rotate
the knob to set the temperature from 120 ºC to 230 ºC. Once both time and temperature are
set, press the Start/Pause knob to start operation.
Air fryer
Fig. 6.
Under this mode, the back heater of the oven is activated, and food is cooked through
convection. The default time and temperature are 30 min and 180 ºC.
Rotate the knob to set the time, from 1 minute to 2 hours. Press the knob to confirm. Rotate
the knob to set the temperature from 100 ºC to 230 ºC. Once both time and temperature are
set, press the Start/Pause knob to start operation.
When it starts operating, the Preheating icon will light up indicating the preheating cycle
has begun. When preheating is finished, the Preheating icon will turn off and the device will
beep 10 times indicating food can be introduced in the oven. The device will start air frying
automatically. The time countdown will be displayed.
Menu
Fig. 7.
The menu has 31 different recipes.
When the menu key is pressed, the Menu icon and the Start/Pause icon will blink. Press the
Start/Pause knob to enter the menu. The display will show "F-00". Rotate the knob to select
the desired recipe "F-01" "F-02" .... "F-31" and press the Start/Pause knob to confirm.
Once the menu has been set and the device has started operating, the Settings/Child lock
icon will light up. The time and temperature for the preset recipes can only be adjusted while
this icon is blinking. Once the icon stops blinking, time and temperature cannot be adjusted
48
BAKE&STEAM 3000 COMBI
until the program finishes.
Defrost
Fig. 8.
When the Defrost function is activated, the Defrost icon and the Start/Pause icon will blink.
Press the Start/Pause knob to confirm. The default time and temperature are 20 min and 55
ºC.
Rotate the knob to set the time, from 5 minutes to 2 hours. Press the knob to confirm. Rotate
the knob to set the temperature from 50 ºC to 60 ºC. Once both time and temperature are set,
press the Start/Pause knob to start operation. The time countdown will be displayed.
Ferment
Fig. 9.
When the Ferment function is activated, the Ferment icon and the Start/Pause icon will blink.
The default time and temperature are 40 min and 40 ºC.
Rotate the knob to set the time, from 5 minutes to 2 hours. Press the knob to confirm. Rotate
the knob to set the temperature from 30 ºC to 50 ºC. Once both time and temperature are set,
press the Start/Pause knob to start operation.
Cleaning
Fig. 10.
When the Cleaning function is activated, the Cleaning icon and the Start/Pause icon will blink.
Press the knob to confirm and select the cleaning mode: "C-1" or "C-2".
C-1: Clean the steam generator from scale in 50 min.
C-2: Clean cavity or disinfect the appliance. 25 min at 100 ºC.
How to clean scale with C-1
When the heating pipe in the steam oven has been run for 100 hours, the system will remind
the user to remove the scale from the evaporating heater. The descaling function can also be
activated automatically and manually when desired. The Cleaning icon will light up when the
function is activated.
The descaling mixture (water and descaling product) must be prepared according to the
mixing ratio of 1:8. Mix it and pour it into the tank. Make sure the mixture in the water tank is
not lower than the MIN. mark and does not exceed the MAX. Mark.
20 minutes before the descaling cycle ends, the device will remind you to pull out the tank,
drain the descaling product and replace it with clean water. The Cleaning icon will blink, and
the device will beep. As soon as the tank is replaced, the device will resume the cycle. 10
minutes before the descaling cycle ends, the device will remind you to pull out the tank and
replace with clean water. As soon as the tank is replaced, the device will resume the cycle.
ENGLISH
49
BAKE&STEAM 3000 COMBI