Bluetooth® Notes; Bluetooth® Wireless Technology; Pairing With Another Bluetooth Device - Teac NR-7CD Manual Del Usuario

Bluetooth® notes
When using this unit with a mobile phone or other Bluetooth devices,
they should be no more than about 10 m (33 ft) apart .
Depending on the circumstances of use, however, the effective
transmission distance might be shorter .
Wireless communication with every device that supports Bluetooth
wireless technology is not guaranteed .
To determine the compatibility between this unit and another device
that supports Bluetooth wireless technology, refer to that device's
operation manual or contact the shop where you purchased it .
Profiles
This unit supports the following Bluetooth profiles .
o A2DP (Advanced Audio Distribution Profile)
o AVRCP (Audio/Video Remote Control Profile)
In order to transfer audio using Bluetooth wireless transmission, the
Bluetooth device must support A2DP .
In order to control playback on the Bluetooth device, it must sup-
port AVRCP .
Even if a Bluetooth device supports the same profiles, though, its
functions might differ according to its specifications .
Codecs
This unit supports the following codecs . It will automatically select
one of them during audio transfer .
o SBC
o AAC
o Qualcomm® aptX™
o LDAC
The unit will select the appropriate codec to use according to the
codec compatibility of the other Bluetooth device and communica-
tion conditions .
LDAC is an audio coding technology developed by Sony that enables
the transmission of High-Resolution (Hi-Res) Audio content, even over a
Bluetooth connection .
Unlike other Bluetooth compatible coding technologies such as SBC, it
operates without any down-conversion of the Hi-Res Audio content*,
and allows approximately three times more data** than those other
technologies to be transmitted over a Bluetooth wireless network with
unprecedented sound quality, by means of efficient coding and opti-
mized packetization .
* excluding DSD format contents
** in comparison with SBC (Subband Coding) when the bitrate of
990 kbps (96/48 kHz) or 909 kbps (88 . 2 /44 . 1 kHz) is selected
NOTE
o You cannot select the codec to be used by pressing a button, for
example .
o Due to characteristics of Bluetooth wireless technology, playback
from a Bluetooth device will be slightly delayed compared to
playback from this unit .
Content protection
This unit supports SCMS-T as a form of content protection when
transmitting audio, so it can play protected audio .
Bluetooth® wireless technology
Transmission security
This unit supports security functions during Bluetooth wireless
transmission in accordance with the Bluetooth standard specifica-
tions, but it does not guarantee the privacy of such transmissions .
TEAC CORPORATION will bear no responsibility should an informa-
tion leak occur during Bluetooth wireless transmission .

Pairing with another Bluetooth device

Pairing this unit with another Bluetooth device is necessary the first
time it is used and when connecting to a different Bluetooth device
for the first time .
1
Turn the SOURCE knob to select Bluetooth.
Bluetooth
SELECT DEVICE?
o If no paired device is available, "NO PAIRED DEVICE" will
appear .
2
Enable Bluetooth transmission on the other
Bluetooth device.
3
Press and hold the ENTER button to enter pair-
ing mode.
Bluetooth
PAIRING
o "PAIRING" blinks when pairing .
4
On the other Bluetooth device, select "NR-7CD"
(this unit).
After this unit enters pairing mode, pair with it from the other
Bluetooth device .
For details, refer to the operation manual of that Bluetooth
device .
After connection, the display will show the input source .
EN
23