F� Disposal Instructions; F.1 Disposal Instructions For Countries In The Eu; G� Technical Data; Mt3 - Renfert MT3 Instrucciones Para El Servicio

F. Disposal instructions
The unit should be disposed of by a specialist firm. The specialist firm should be informed of any hazardous residue in
the unit�
F.1 Disposal instructions for countries in the EU
To conserve and protect the environment, prevent environmental pollution and improve the recycling of raw materials,
the European Commission adopted a directive that requires the manufacturer to accept the return of electrical and
electronic units for proper disposal or recycling�
Within the European Union units with this symbol should not therefore be disposed of in unsorted domestic
waste.
For more information regarding proper disposal please apply at your local authorities�
G. Technical data
EN
Nominal voltage:
Power consumption:
Speed:
Water consumption, max�:
Necessary water pressure:
Connection piece diameters for drain hose:
Dimensions (W x H x D):
Ø Trimmer disc dimensions:
Weight (without trimmer disc):
LpA *) (idel):
*) Sound pressure level in accord� with EN ISO 11202
Maesurement of motor sound only� Depending on workpiece and method of operation the grinding noise can be louder�
H. Disclaimer
Renfert GmbH is not liable for claims for compensation or claims under guarantee if:
► the product is used for purposes other than those stated in the operating instructions.
► the product is modified in any way – apart from modifications described in the operating instructions.
► the product has not been repaired by a specialist firm or original Renfert replacement parts have not been
used.
► there is continued use of the product despite obvious safety defects or damage.
► the product has been subjected to mechanical knocks or has been dropped.
I. Guarantee
Renfert gives a 3-year guarantee on all parts of the MT3 / MT3pro provided that the product is used in accordance
with the operating instructions�
The original sales invoice of the specialist depot is required for a claim under guarantee�
Parts which are subject to natural wear and tear (wear parts) and consumables are excluded from the guarantee�
These parts are marked in the spare part list�
The guarantee is rendered void in the case of incorrect use, non-adherence to the operating, cleaning, servicing or
connection instructions, repairs carried out by the owner or repairs that are not carried out by a specialist firm, use of
replacement parts from another manufacturer or unusual or unapproved uses not specified in the user guidelines.
Successful claims under guarantee do not extend the guarantee period�
EN

MT3

220 - 240 V, 50/60 Hz
100 - 120 V, 50/60 Hz
1,300 W [1�74 hp]
(220 - 240 V)
1,325 W [1�78 hp]
(120 V)
2,880 1/min (50 Hz)
3,400 1/min (60 Hz)
min� 1 bar [min� 14�5 psi]
max� 5 bar [max� 72�5 psi]
305 x 330 x 410 mm
[12�0 x 13�0 x 16�1 inch]
13�2 kg [29 lbs]
- 10 -

MT3 pro

230 V, 50 Hz
120 V, 60 Hz
1,650 W [2�21 hp]
(230 V)
1,500 W [2�01 hp]
(120 V)
7 l/min [0�25 cfm]
36 mm [1�42 inch]
234 mm [9�2 inch]
14�5 kg [32 lbs]
74 dB(A)
Subject to alteration