WARNING
!
16. The equipment is NOT intended to be mounted onto surfaces which may act as sources of heating
or cooling.
17. Do NOT operate the instruments outside the temperature range stated in the Specification section.
18. Do NOT open the front enclosures. Doing so will invalidate the warranty. Front enclosures may
be opened only for advised repair maintenance by an authorized and qualified person.
19. Do NOT modify or alter the construction of the product as essential safety and certification
requirements may be invalidated.
20. Installation, set-up and maintenance must be conducted only by trained personnel. Refer to the
manual at all times.
21. Access to the interior of the product, when carrying out any work, must be conducted only by
trained personnel.
22. The plastic transport cap supplied must be replaced with suitably certified closers (such as glands
or stopping plugs) prior to commissioning. Failure to do so presents a potential source of ignition.
One certified stopping plug is supplied as standard.
23. Do NOT rely on the local visual indicator for safety related purposes.
CAUTION
!
1. A mobile device with Honeywell Fixed Platform App installed is a prerequisite for detector settings
adjustment made via the Bluetooth connection.
2. Commissioning or proof test of Searchline Excel Edge is not complete until the unit is tested to verify
that it functions according to its specifications.
NOTE:
If the last connection and synchronization between Honeywell Fixed Platform App and the server was
established more than 1 year previously, a caution message will be shown in the App with request to
establish an Internet connection and renew security certificate. This will NOT affect instrument's operation.
WHAT'S IN THE BOX?
1 Searchline Excel Edge receiver (box no.1)
1 Searchline Excel Edge transmitter (box no.2)
1 Universal Mounting Bracket
1 Plastic sunshade (stainless steel optional)
1 Antenna cover
1 Allen (hex) key, size 10
1 Allen (hex) key, size 8
1 Allen (hex) key, size 5
1 Allen (hex) key, size 1.5
1 Registration sheet
1 Quick Start Guide (this document)
INSTALLATION
CAUTION
!
1. Check the packaging for damage before opening. If the packaging shows signs of tearing, breakage or
other damage, immediately inform the transport company and the supplier. Document the damage in
an appropriate way (e.g., photographs).
2. Open the packaging carefully to avoid damaging the contents.
3. Examine the Searchline Excel Edge receiver and transmitter and the mount and sunshade for damage.
If you find any item to be damaged in any way, immediately inform the transport company and the
supplier. Document the damage in an appropriate way (e.g., photographs).
(4)