Yamaha Warrior YFM350XS Manual Del Propietário página 262

1. Engine oil filter cover
3. Engine oil filter element
1. Couvercle du filtre à huile de moteur
3. Élément du filtre à huile de moteur
4. Joint torique
1. Tapa del filtro de aceite de motor
3. Elemento del filtro de aceite de motor
4. Junta tórica
2. Bolt (× 3)
4. O-ring
2. Boulon (× 3)
2. Perno (× 3)
8-19
5. Remove the oil filter cover by removing the
bolts and then remove the oil filter element.
6. Clean the oil strainer and oil filter element
with solvent.
7. Check the O-ring for damage and replace it if
necessary.
8. Install the oil filter element and O-ring.
9. Install the oil filter cover by installing the bolts.
10. Install the oil strainer, compression spring, O-
ring and drain bolt. Tighten the drain bolt and
oil filter cover bolts to the specified torques.
CAUTION:
_
Before installing the drain bolt, be sure to in-
stall the O-ring, compression spring and oil
strainer.
_