Display Controls - VALBERG SBS 578 WD F DX180C Instrucciones De Uso

B

Display controls

Use your appliance according to the following control guidelines. Your appliance has functions and
modes corresponding to the control panels shown in the pictures below. When the appliance is
powered on for the first time, the backlighting of the icons on the display panel is activated. If no
buttons have been pressed and the doors are closed, the backlighting will turn off after 60 seconds.
The control panel consists of 2 areas showing temperature, 5 icons showing mode and 4 control
buttons
Controlling the temperature
For optimum food preservation,
We recommend setting the refrigerator temperature to 5°C and the freezer to -18°C when you start
your refrigerator for the first time. If you want to change the temperature, follow the instructions
below.
WARNING:
When you set a temperature, you set an average temperature for the
whole refrigerator cabinet. Temperatures inside each compartment may vary from the
temperatures displayed on the panel, depending on how much food you store and where
you place it. High or low room temperature may also affect the actual temperature inside
the appliance
1. Unlock 3s
All the buttons are locked if the icon " " is illuminated. You can press the "unlock
for 3 seconds to unlock them. You can press the "unlock
the buttons when you finish temperature setting.
Using the appliance
35
3 s " button for 3 seconds to lock all
EN
3 s" button