3 Either:
• Type and press
for a selection:
Continue with step 4.
• Type and press
4 At the prompt to select a new portal application, either:
• Type and press
• Type and press
* Note: Select the appropriate application based on the purchase order associated with this server. The
software license specifies the Java or HTML application, and the application type must be set accordingly.
Once you make your selection, the server will display confirmation and prompt you to reboot the system, for
example:
5 Either:
• Type and press
minutes, after which the system resumes normal operation.
• Type and press
however, note that you must eventually reset the system in order to apply the new portal application
configuration.
• See "Reset the System" on page 37 when you are ready to reset the system.
* Note: If you intend to modify additional configuration settings during the current session, you may wait
until all changes are complete before you reset the system.
The remainder of the new portal application setup—configuration of feature set, output parameters, video
playout settings, Pro:Centric Channel Map, customized portal interactive menus, etc.—is performed in the
appropriate Admin Client, as indicated at the beginning of this section. Refer to either the Pro:Centric Server
Admin Client User Guide (Java application) or the Pro:Centric Direct Admin Client User Guide (HTML
application), as applicable, for further information.
* Caution: When your Admin Client portal configuration activities are complete, you must reset
the server to activate the new application configuration.
34
to continue. The system will display the available applications, followed by a prompt
to return to the Main Menu without changing the portal application.
to select the Java application.
to select the HTML application.
to initiate an immediate reset of the PCS400R. The reset process may take several
to return to the Main Menu without resetting the system at the current time;