Shut Down The System; Reset The System; Exit The Current Session - LG PCS400R Servidor Pro:Centric Instalación Y Configuración

Shut Down the System

This command allows you to shut down the system in an orderly manner. Use this command to shut down
the PCS400R, for example, if you intend to physically move the unit from one location to another. It is also
recommended that you run this command from the PCS400R Service Port in order to track detailed shutdown
log messages.
* Note: Once you use this command, you must remove power from (i.e., unplug) the unit and then plug the
AC power cord back into a powered AC line receptacle when you are ready to restart the server. It is not
possible to restart the server remotely.
1 Log in to the PCS400R as described on page 25.
2 At the prompt, type shut and press
The system will prompt for confirmation:
3 Either:
• Type and press
When the PCS400R is in its shutdown state, the front panel LED will blink steadily green.
• Type and press

Reset the System

1 If not already logged in, log in to the PCS400R as described on page 25.
2 At the prompt, type reset and press
The system will prompt for confirmation:
3 Either:
• Type and press
minutes, after which the system resumes normal operation.
• Type and press
Exit the Current Session
At the prompt, type
to shut down the system immediately. The shutdown typically takes about a minute.
to return to the Main Menu without shutting down the system.
to initiate an immediate reset of the PCS400R. The reset process may take several
to return to the Main Menu without resetting the system.
and press
.
.
to end the current session.
37