Kit Preparation; Kit Assembly - Metra 99-7339 Instrucciones De Instalación

Kit Preparation

1. Attach the climate control to the 99-7339 trim plate using the factory hardware.
(Figure A)
2. Attach the (6) panel clips to the 99-7339 trim plate. (Figure B)
Continue to kit assembly
(Figure A)

Kit Assembly

(Figure B)
Stacked ISO DIN radio provision
with pocket
1. Attach the ISO brackets to the
aftermarket radio (Figure A), then
secure the assembly to the pocket
using the (4) supplied Phillips
screws (Figure B).
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
3. Mount the assembly into the
sub dash.
4. Reassemble dash in reverse order
of disassembly using the 99-7339
trim panel instead of the factory
trim panel.
3
(Figure A)
(Figure B)