Kit Assembly; Din Radio Provision With Pocket - Metra 99-3305 Instrucciones De Instalación

1. Slide the DIN cage into the radio housing and
secure by bending the metal locking tabs down.
(Figure B)
Note XL-7 ONLY: Trim top corners of radio
housing. (Figure A)
2. Slide the aftermarket radio into the cage and
secure. (Figure C)
3. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-3305

DIN radio provision with pocket

(Figure A)
(Figure B)
8
(Figure C)