Viking Range 5 Serie Guía De Uso/Instalación página 8

INSTALL HOUSING INTO
CABINET
1. Remove cooktop.
2. Set housing into cabinet / countertop opening as far back as
possible and make sure it is level.
HEX NUT
SUPPORT LEGS
(2)
SCREWS
3. Extend SUPPORT LEGS and attach to bottom of cabinet with
(2) SCREWS through each leg. Tighten HEX NUTS.
1
HEX NUT
8
4. Extend UPPER SUPPORT BRACKETS and attached to sides
of cabinet with (2) SCREWS through each bracket.
BOLTS
1
SCREWS
Installations using FLEX BLOWER only:
5. Loosen (4) BOLTS attaching BLOWER SUPPORT LEGS to FLEX
BLOWER. Extend legs and secure them to bottom of cabinet
with a SCREW through each bracket.
UPPER
SUPPORT
BRACKET
(2) SCREWS
FLEX
BLOWER
(4)