Caberg UPTOWN Manual De Instrucciones página 6

1. HOW TO REMOVE THE CLEAR VISOR
1.1 Rotate counter-clockwise the lateral rounded plate on
the visor and remove it. (Pic.1)
1.2 Remove the screw and the washer (Pic. 2)
1.3 Release the visor and its' mechanism.
1.4 Repeat the same operation on the other side of the
helmet.
1.5 To fit the visor, follow the above steps in reverse.
2. HOW TO REMOVE THE INTERNAL SUN VISOR.
2.1 Drive forward the lever on top to move the sun visor.
(Pic. 3)
2.2 Release the sun visor by lifting the slider that fix it to
the lever with a flathead screwdriver. (Pic.4)
2.3 Remove the sun visor by pulling gently outwards. (Pic. 5)
2.4 To fit the sun visor follow the above steps in reverse.
WARINING! Never use the sun visor at night time or with scar-
ce visibility condition.
WARNING! Any adjustment operation to the sun visor must be
done with the two wheeler in still position.
3. HOW TO REMOVE THE WASHABLE INNER LINER.
3.1 Release the front side of the liner by pulling it down
gently (Pic. 6)
3.2 Pull out the chin strap on both sides from the suitable
slots on the inner liner. (Pic. 7)
3.3 Release the back/neck side of the liner by pulling it
gently towards the inside of the helmet (Pic. 8).
3.4 Completely remove the inner liner from the helmet.
6