1
POWER IN
Permanently attached power cord with screw-down special cable plug (dust- and spray-proof according to
IP65). Power cord with Schuko plug included.
2
POWER OUT
Permanently attached power cord with screw-down special cable plug (dust- and spray-proof according to
IP65) for powering additional CAMEO outdoor lights (screw-on cap included). Make certain that the power
consumption of all connected devices does not exceed 13 amperes. It can connected directly to an additional
CAMEO outdoor light of the same type. Matching power cords in various lengths are available as
accessories. When operating an outdoor light, the POWER OUT cable must be closed securely by the cap. The
same applies for outdoor lights that are at the end of a chain of lights.
3
DMX IN
Permanently attached DMX cable with screw-down special cable plug (dust- and spray-proof according to
IP65) for connecting a DMX controller (e.g., DMX mixer). Screw-down cap and DMX connecting cable with
male 3-pole XLR plug included.
4
DMX OUT
Permanently attached DMX cable with screw-down special cable plug (dust- and spray-proof according to
IP65) for looping through the DMX control signal. Screw-down cap included. It can connected directly to an
additional CAMEO outdoor light of the same type. Matching DMX cables in various lengths are available as
accessories. When operating an outdoor light, the DMX OUT cable must be closed securely by the cap. The
same applies for outdoor lights that are at the end of a chain of lights.
5
LED DISPLAY
Display of the operating modes and additional system settings.
6
CONTROL BUTTONS
Selection of the operating modes and additional system settings.
IMPORTANT INFORMATION:
Use only the original cables both for power supply and for the signal connections.
Make certain that the screw connections of the cable plugs are intact and always closed firmly and that there are
no foreign bodies such as dust or dirt in the threads.
REAR PANEL / CONNECTING CABLE:
9