Disposal And Recycling - EINHELL TC-HP 1435 Manual De Instrucciones

8.2.2 Long periods of nonuse (electric pump)
If the equipment is going to be stored for longer
periods of time (i.e. over three months) in a room
where the temperature could drop below freezing
point, it is recommended that the equipment be
fi lled with an antifreeze solution (similar to the an-
tifreeze solutions used for vehicles).
If the device is not used for an extended period
of time, lime deposits will begin to form in the
electric pump, which in turn can lead to starting
diffi culties.
8.2.3 Cleaning the nozzle (Fig. 9)
Use the supplied wire (A) to clean clogged nozz-
les.
9. Transport
Before transporting the equipment to a diff erent
location, remove all connections. The equipment
is then free for transport.

10. Disposal and recycling

The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
Anl_SA_TC_HP_1435_SPK8.indb 29 Anl_SA_TC_HP_1435_SPK8.indb 29
GB
11. Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
- 29 -
17.10.2017 08:05:26 17.10.2017 08:05:26