GB
F
D
E
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician.
For service we suggest you return the product to your
nearest AUTHORIZED SERVICE CENTER for repair.
When servicing, use only identical replacement parts.
WARNING
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
Save this operator 's manual and review
frequently for continuing safe operation and
instructing others who may use this product.
SAVE THESE INSTRUCTIONS.
FEATURES
PRODUCT SPECIFICATIONS
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.9 kg
Engine displacement . . . . . . . . . . . . . . . . . . . . . . . .30 cc
Air Velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . .290 km/h
Sound power level . . . . . . . . . . . . . . . . . . . . . .108 dB(A)
Maximum engine performance . . . . . . . . . . . . . .0.78 kw
Maximum rotational frequency
of the engine . . . . . . . . . . . . . . . . . . . . . . . . .10,000 /min
Engine speed at idling . . . . . . . . . . . . . .2800~3500 /min
Fuel tank volume . . . . . . . . . . . . . . . . . . . . . . . . . .0.45 L
Vibration level . . . . . . . . . . . . . . . . . . . . . . . . . . .2.7 m/s
DESCRIPTION
1.
Blower
2.
Large clamps
3.
Elbow
4.
Bellows
5.
Cable tie
6.
Small clamp
7.
Control handle
8.
Engine
9.
Harness straps
10. Wide sweeper nozzle
11. Ignition switch
12. Throttle trigger
13. Trigger lock
14. Straight tube
15. Upper tube
16. Wing nut
17. Throttle cable
18. Cable tie
19. Short looped end of strap
I
P
NL
S
DK
N
FIN GR HU
CZ RU
English
20. Extruded end of bracket
21. Top bracket
22. Slot in backpack frame
23. Buckle
24. Primer bulb
25. Choke lever
26. Position START
27. Position RUN
28. Air filter
29. Air filter cover
30. Base
31. Idle speed screw
KNOW YOUR BLOWER (Figure 1)
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLOWER TUBES AND NOZZLE
The blower tubes can be assembled and installed on the
blower using no tools.
MOTOR
The blower has a powerful 30cc engine with sufficient
power to handle tough jobs.
THROTTLE TRIGGER
The blower can be operated at any speed between idle
and full throttle.
TRIGGER LOCK
The trigger lock (13) feature is used for easier starting
2
and also allows the user to operate the blower without
holding the throttle trigger (12). To disengage the trigger
lock, simply depress the throttle trigger.
WIDE SWEEPER NOZZLE
The wide sweeper nozzle (10) allows for more area to be
covered during blower operation.
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from
■
the box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage or
■
damage occurred during shipping.
Do not discard the packing material until you have
■
carefully inspected and satisfactorily operated the tool.
11
RO PL SLO HR TR EST LT
LV
SK BG