AL-KO HT 600 FLEXIBLE CUT Instrucciones De Uso página 18

Remove any adjusting key or wrench before tur-
„
ning the power tool on. A wrench or a key left at-
tached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and balan-
„
ce at all times. This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose clothing or je-
„
wellery. Keep your hair, clothing and gloves away
from moving parts.Loose clothes, jewellery or
long hair can be caught in moving parts.
If devices are provided for the connection of dust
„
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct po-
„
wer tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
Do not use the power tool if the switch does not
„
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
18
Disconnect the tool from the power source before
„
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the reach of children
„
and do not allow persons unfamiliar with the pow-
er tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of
untrained users.
Maintain power tools. Check for misalignment or
„
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation.If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
„
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
„
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for opera-
tions different from those intended could result in
a hazardous situation.
Service
Have your power tool serviced by a qualified re-
„
pair person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
Translation of the original operating instructions
AL-KO Hedge trimmer