Pair An Additional Mobile Device; Disconnect A Device; Reconnect A Device - Bose SOUNDLINK REVOLVE II Manual Del Usuario

PAIR AN ADDITIONAL MOBILE DEVICE

You can store up to eight paired mobile devices in the speaker pairing list.
• Press and hold the Bluetooth button l until the Bluetooth light blinks blue,
and you hear, "Ready to pair another device." Pair your device to the speaker
(see page 20).
• If your device supports pairing via NFC, see page 21.

DISCONNECT A DEVICE

• Turn off the Bluetooth feature on your device.
• If your device supports pairing via NFC, tap and hold the NFC touchpoint on your
device to the top center of your speaker. The target area is the Bose logo.

RECONNECT A DEVICE

When powered on, your speaker tries to reconnect with the two most
recently-connected devices.
NOTE: The devices must be within range and powered on.
If your device supports pairing via NFC, tap and hold the NFC touchpoint on your
device to the top of your speaker. The target area is the Bose logo.
B LU ETO OT H CO N NE C T I O NS
|
2 2 E N G