Switch Between Party Mode And Stereo Mode; Disable Party Mode Or Stereo Mode - Bose SOUNDLINK REVOLVE II Manual Del Usuario

Stereo mode
1. Configure your speakers for Party mode (see page 28).
2. On a speaker, press the Bluetooth button l and H simultaneously.
3. Release the buttons when you hear "Stereo mode." You hear "Left" from the left
speaker and "Right" from the right speaker.
Stereo mode is enabled. You are now able to play audio in stereo using your
mobile device.
4. For an optimal experience, position your speakers:
• In the same room or outdoor area
• Within 10 feet of each other, free from obstructions
• So that your distance to each speaker is equal
NOTE: Performance may vary based on mobile device, distance and
environmental factors.

Switch between Party mode and Stereo mode

On either speaker, press l and H simultaneously.

Disable Party mode or Stereo mode

Do one of the following on either speaker:
• Press and hold l until you hear "Bose speakers unlinked."
• Press and hold the Multi-function button V and H simultaneously until you hear
"Bose speakers unlinked."
• Press the Power button I to power off the speaker.
PA IR BOSE P R O D UC TS
|
2 9 E N G