Sound Adjustment - Widex COM-Dex Remote Mic Manual De Instrucciones

Sound adjustment

The sound that is streamed from the device to COM-DEX can be adjusted
in 3 levels. Simply push the power button on the side of the device and
the sound level will be altered in a three step circle (highest level – lowest
level – back to normal level).
Visual indicators - see illustration 5
Your device has two LEDs that flash with different colours. The purpose of
these colours is to inform you of which mode your device is in at any giv-
en time.
● Constant red light on the bottom LED: The device is charging.
● Constant green light on the bottom LED: The device is fully charged.
● Flashing blue-red-blue-red light on both LEDS: The device is ready to
be paired.
● Flashing blue light on the top LED: The device is on, but there is no
connection to the paired COM-DEX.
● Flashing green light on the top LED: The device is on and connected
to the COM-DEX, but it is not streaming.
● Constant green light on the top LED: The device is on and streaming.
● Occasionally flashing red light on both LEDs: The battery is low.
Maintenance
● Clean the device with a damp cloth. Do not use any liquids or chemi-
cals and do not immerse in liquids.
● When the device is not in use keep it in a dry location out of reach of
children and pets.
6