Siemens SIMO DCM Manual De Configuración página 44

Bloque SIMO_DCM
3.2 Bloque de control
Parámetro Tipo
L_CLOCKW BOOL
L_COUNT BOOL
L_OFF BOOL
L_PUL_EN BOOL
L_RES_MA BOOL
L_RESET BOOL
LADDR INT
LADDR_O WORD
LIOP_SEL BOOL
LIOP_SEL_SP BOOL
LLSP_INT_A REAL
LLSP_INT_M REAL
LOCK BOOL
LOCK_MSS INT
LOCK_ON_OP BOOL
LOCK_OP BOOL
LR_MAN_AUT BOOL
MAIN_D INT
MAIN_L INT
MAIN_M INT
MANOP_EN BOOL
44
Modalidad Por de‐ Comentario
fecto
IN TRUE Linkable input: Clockwise motor direction
IN TRUE Linkable input: Counterclockwise motor di‐
rection
IN FALSE Linkable input:
=0:
=1:
IN TRUE Linkable input: Enable pulses
IN FALSE Linkable input: Maintenance reset
IN FALSE Linkable input: Error reset
IN 0 Logical address of module
OUT 0 Logical address of module
IN FALSE Control word set:
=0:
=1:
IN FALSE Setpoint set:
=0:
=1:
IN -105.0 Lower limit of internal setpoint, control
word automatic
INOUT 0.0 Lower limit of internal setpoint, control
word manual
IN TRUE Linkable input:
=0:
=1:
IN 2 =0:
=2:
=3:
IN FALSE =1:
IN FALSE =1:
IN FALSE Switching local to remote:
=0:
=1:
IN 0 Backup of days since last maintenance
IN 100 Time interval for maintenance low [day]
IN 200 Time interval for maintenance middle [day]
IN TRUE =1:
OFF
ON
By operator
By linking
By operator
By linking
OFF2
Operating condition
STOP Button invisible
STOP Button effects OFF2
STOP Button effects OFF3
Lock, ON
Ver capítulo: Bloqueo (Página 32).
Lock, OFF
Ver capítulo: Bloqueo (Página 32).
Reactivate previously selected mo‐
de
Activate manual mode
Manual operation enable
Manual de configuración, 04/2016
S7_m_c:=TRUE
X = parámetro
de manejo y vi‐
sualización
X
X
X
X
X
X
Bloque SIMO_DCM