Spare Parts; Standard Delivery; Accessories; Error List - Renfert Vibrax Instrucciones Para El Servicio

4. Spare Parts

You can find components subject to wear
and the spare parts on the spare part list
in the internet at www.renfert.com/p918�
The components excluded from the
warranty (such as consumables or parts
subject to wear and tear) are marked on
the spare part list�
Serial number and date of manufacturing
are shown on the type plate of the unit�

7. Error List

Error
The device generates
no vibrations.
No difference in the
vibration intensity
between the switch
settings Fine / Coarse.
No function in coarse
oscillation mode.
No function in fine
oscillation mode.
No effect at the
different power level
settings.
Device extremely loud
during operation.
EN
Possible cause
• Power cord not prop-
erly plugged in at the
device�
• Blown fuse�
• No power at the wall
outlet�
• Faulty diode (short
circuit)�
• Faulty diode (interrup-
tion)�
• Faulty switch�
• Faulty switch connec-
tion wiring�
• Faulty switch�
• Faulty switch connec-
tion wiring�
• Faulty switch�
• Faulty switch connec-
tion wiring�
• Loose internal compo-
nents�
• Loose rubber mat�
- 4 -

5. Standard Delivery

1 Vibrax
1 Rubber mat
1 Power cord
1 Operating instructions
1 SW4 Allen key (in the control lever,
Figure 3)

6. Accessories

1830-0001 Vibration ball
Corrective action
• Check that the power cord is
securely seated in the socket�
• Replace the fuse (refer to
Sec� 3�4)�
• Test the wall outlet for power�
• Return the device for service�
• Return the device for service�
• Return the device for service�
• Return the device for service�
• Return the device for service�
• Attach the rubber mat correctly
(see Chap� 1�2)�