Using The Remote Controller - DJI Matrice 200 V2 Guia De Inicio Rapido

Mounting the Monitor to the Remote Controller
A
B
Ensure that Part B is
unlocked. Connect Part B
to Part A.
Connecting the Mobile Device

Using the Remote Controller

The Stick Mode is set to Mode 2 by default. In Mode 2, the left stick controls the aircraft's elevation and heading, and the right
stick controls the aircraft's forward, backward, and lateral movements. To adjust the FPV camera, press and hold the C2 Button
and rotate the left dial.
Left Stick
Up
Down
Turn Left
For more information about how to connect and use the remote controller, please refer to the user manual.
You can change the stick mode and customize the C1-C4 and BA-BH buttons' functions in the DJI Pilot app.
Lock the Mounting Bracket.
Press the button to
release the clamp.
Right Stick
Turn Right
Use a coin or the screwdriver
included to adjust the
tightness of the tilt axis.
Place your mobile
2
device and adjust
the clamp to secure.
1
Connect your mobile
3
device with a USB cable.
Forward
Backward
Left Right
FPV Camera
5