Preparing The Remote Controller - DJI MAVIC 2 ENTERPRISE Advanced Guia De Inicio Rapido

Checking the Battery Levels and Powering On/Off
Low
High
Press once to check the battery level.
Press, then press and hold to turn on/off.
Install the battery to the aircraft and power it on. Once the battery temperature is lower
than 6° C, it will auto heat to maintain a temperature between 8-10° C. Refer to the
User Manual for more details.

3. Preparing the Remote Controller

Lift the antennas
The optimal transmission range is shown above. Ensure the antennas are facing towards
the aircraft. When the angle between the antennas and the back of the Smart Controller
is 80° or 180°, the connection between the Smart Controller and the aircraft can reach
its optimal performance.
Ensure the control sticks are firmly mounted.
In real operation, the DJI Pilot app will prompt to warn that the transmission signal
is weak, and please adjust the antennas to ensure that the aircraft is back to the
optimal transmission range.
Low
Press once to check the battery level on the
LCD screen.
Press once, then press and hold to turn on/
off the remote controller.
Remove the sticks
80°
High
Rotate to attach
the sticks
5