Leuze electronic BCL 8 S M 100 Manual De Instrucciones página 15

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Bar code readers of the BCL 8 series are conceived as stationary scanners with
integrated decoder for all current bar codes used for automatic object detection.
Areas of application
The bar code readers of the BCL 8 series are designed for the following areas of
application:
- Labeling and packaging machines
- Automatic analyzers
- For space-critical bar code reading tasks
- Material flow
- Pharmaceutical industry
- Robotics and automation technology
CAUTION!
Observe intended use!
 Only operate the device in accordance with its intended use. The
protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
 Read the technical description before commissioning the device.
Knowledge of this technical description is an element of proper use.
NOTE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the
employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that use
is considered improper use.
In particular, use of the device is not permitted in the following cases:
- in rooms with explosive atmospheres
- in circuits which are relevant to safety
- for medical purposes
EN
15