Sauder Cannery Bridge 416082 Manual De Usuario página 15

Step 11
First, fi ll the holes in the FRONT SKIRT (M) 1/4 to 1/2 full with GLUE (54M). Then, insert the WOOD DOWELS (15F) into
å
the holes. Wipe away the excess GLUE.
NOTE: Be sure to use the exact holes shown.
å
Now, fi ll the hole in the LEFT FRONT LEG (J) 1/4 to 1/2 full with GLUE.
å
Fasten the FRONT SKIRT (M) to the LEFT FRONT LEG (J). Tighten a HIDDEN CAM.
å
NOTE: Be sure the WOOD DOWEL in the FRONT SKIRT inserts into the hole in the LEG. Wipe away the excess GLUE.
å
Fill the holes in the LEGS (I and K) on the RIGHT END (A) 1/4 to 1/2 full with GLUE.
å
Fasten the RIGHT END (A) and LEGS (I and K) to the BOTTOM (E2), SKIRTS (M and N), and BOTTOM MOLDING (P).
å
Tighten two TWIST-LOCK® FASTENERS and two HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the SKIRTS and BOTTOM MOLDING insert into the holes in the LEGS. You will not
å
tighten the HIDDEN CAMS on the BACK SKIRT (N) at this time.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
www.sauder.com/services
J
B
416082
Surface with
HIDDEN CAMS
I
S u r
A f a c
T W
e w
I S T -
i t h
F A S
L O C
T E N
K ®
E R S
P
M
E2
N
M
15F
K
54M
Page 15