Sauder Cannery Bridge 416082 Manual De Usuario página 22

Step 18
IMPORTANT: This unit must be placed against a wall.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
å
in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (H) onto the METAL PINS.
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S) into
å
the top of the unit and a BLACK 2-3/4" FLAT HEAD SCREW (100S) into a stud in your wall.
Apply the WARNING LABEL (5L) to the left DOOR (G). You should be able to read the label when the DOOR is open. When
å
the DOOR is closed, it will hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
Push a CAM COVER (36P) onto each visible HIDDEN CAM.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
5L
H
25 lbs.
B
G
H
25 lbs.
H
25 lbs.
1R
(24 used)
2R
Page 22
1G
No load
H
25 lbs.
C
A
H
25 lbs.
H
25 lbs.
50 lbs. total
BLACK 2-3/4" FLAT HEAD SCREW
(1 used into a stud in your wall)
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
36P
(10 used)
To cover HIDDEN CAMS
416082
100S
1S
WARNING
www.sauder.com/services