Twist-Lock - Sauder Cannery Bridge 416082 Manual De Usuario

Step 4
First, fi ll the holes in the LEGS (I and J) 1/4 to 1/2 full with
å
GLUE (54M). Then, insert the WOOD DOWELS (15F) into
the holes. Wipe away the excess GLUE.
Now, fi ll the holes in the ENDS (A and B) 1/4 to 1/2 full
å
with GLUE.
Fasten the LEGS (I and J) to the ENDS (A and B). Tighten
å
ten HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the LEGS insert
å
into the holes in the ENDS. Wipe away the excess GLUE.
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
1
2
Page 8
These surfaces
should be even.
J
I
A
416082
Edge with
TWIST-LOCK®
FASTENERS
Fill the holes 1/4 to 1/2 full with GLUE.
B
15F
54M
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Edge with three CAM SCREWS
www.sauder.com/services
15F