Technical Data; Machine Features - Festool DRC 18/4 Li Manual De Instrucciones

3 Intended use
Cordless drill suitable for
– drilling in metal, wood, plastic and similar mate-
rials,
– inserting and tightening screws
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
4

Technical data

Cordless drill
Motor voltage
Idling speed*
Torque for easy/tough fastening
applications
Adjustable torque**
Chuck clamping range
Drill diameter max.
Fastening in pine
Tool holder in drill spindle
Weight without battery pack with
Centrotec
* Speed specifications with fully charged battery
pack.
** The maximum speed is reduced in the lower
torque stages (values in counterclockwise rotation).
5

Machine features

[1-1] LED light switch
[1-2] LED lamp
[1-3] Bit store
[1-4] On/Off switch
[1-5] Clamping sleeve
[1-6] Gear switch
[1-7] Torque thumbwheel
[1-8] Right/left switch
[1-9] Belt clip
[1-10] Button for releasing the battery pack
DRC18/4 Li
18 V
1st gear 0 - 400 min-1
2nd gear 0 - 850 min
3rd gear 0 - 1850 min
4th gear 0 - 3800 min
40/60 Nm
1st gear 1,2 - 11,5 Nm
2nd gear 0,8 - 7,2 Nm
3rd gear 0,6 - 4,7 Nm
4th gear 0,6 - 2,6 Nm
1,5 - 13 mm
Wood 50 mm
Metal 13 mm
max. 10 mm
1/4"
1,2 kg
[1-11] Insulated gripping surfaces (grey shaded
area)
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Commissioning
6.1 Changing the battery pack
Inserting the battery pack [2 A]
Removing the battery pack[2 B]
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
6.2 Light and battery capacity indicator
-1
The LED on the lamp [1-2] is both a light and
-1
a battery capacity indicator .
-1
Press the LED light switch [1-1]:
1x ... LED, working area illumination
2x ... capacity indicator, indicates the charging
state of the battery pack (not with NiCd and
NiMH battery packs)
7 Settings
Risk of injury
Always switch off the power tool before adjusting
settings!
7.1 Changing direction of rotation [1-8]
• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation
DRC 18/4 Li
LED green – lit continuously:
charged > 60 %
LED green – flashing slowly:
charged 30 % – 60 %
LED green – flashing quickly:
charged 0 % – 30 %
LED yellow – lit continuously:
battery is empty
LED red – lit continuously: bat-
tery temperature is outside the
permitted range.
LED red – flashing: indicates a
general fault, e.g. incomplete
contact, short circuit, battery
pack faulty, etc.
CAUTION
GB
11