Technical Data; Machine Features - Festool CXS Manual De Instrucciones

CXS
GB
Wear ear protection.
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Drilling in metall
Fastening
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
2 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Wear protective goggles.
Do not throw in the household waste.
3

Technical data

Cordless drill
Motor voltage
Idling speed*
Max. torque
soft/ hard material
Adjustable torque
Chuck clamping range
12
(vector sum for three
h
a =3,0 m/s
h
K = 1,5 m/s
a =4,0 m/s
h
K = 1,5 m/s
10.8 V
1st gear 0 - 400 rpm
2nd gear 0 - 1200 rpm
10/ 16 Nm
0.2 - 2.4 Nm
1 - 8 mm
Cordless drill
Drill diameter max.
Wood/ Metal
Tool holder in drill spindle
Weight without battery pack
2
with Centrotec
2
2 Charger
2
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Charging times for
LiIon 1,5 Ah, 80 %/ 100 %
Permitted operating tempera-
ture range
Temperature monitoring
Safety class
Battery pack
Voltage
Capacity
Number of cells
Permitted battery temperature
for charging
Weight
* Speed specifications with fully charged battery
pack.
4

Machine features

[1-1] Torque thumbwheel
[1-2] Drilling symbol
[1-3] Torque/drilling position marking
[1-4] Gear switch
[1-5] Right/left switch
[1-6] On/Off switch
[1-7] Belt clip
CXS
[1-8] Button for releasing the battery pack
[1-9] Bit store
[1-10] LED lamp
[3] Wall mount
The specified illustrations appear at the beginning
of the Operating Instructions.
5 Intended use
Cordless drill suitable for
CXS
12/ 8 mm
1/4 ''
0.7 kg
MXC
220 - 240 V ~
50/60 Hz
10.8 V=
typ. 2.8 A
approx. 23/ 35 min
-10 °C to + 40 °C
via NTC-resistor
/II
BP-XS
10.8 V
1.5 Ah
3
0 °C to + 45 °C
0.2 kg