Technical Data; Intended Use - Festool TDK 12 Manual De Instrucciones

Various dust created by power sanding, sawing, grinding, drilling and other
construction activities contains chemicals known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
The risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust masks that are specially designed
to filter out microscopic particles.
Cordless drill/screwdriver
Motor voltage
Idle-running speed
Max torque
Adjustable torque
Chuck capacity
Max. drill diameter for metal / wood
Tool fitting in chuck
Weight with battery pack
Charger
Supply voltage (input) / line frequency
Charging voltage (output)
Charging current
• Quick charge
• Compensation charge, pulsating
Charging time for
Battery pack
Order number
Voltage
Capacity
Temp. range for charging
Monitoring of charge
Weight
Symbols
V volts
A amperes
Hz hertz
W watt
~ alternating current
n no load speed
0
Class II Construction
rpm revolutions per minute

Technical data

• 1. speed
• 2. speed
• Soft case
• Hard case
• 1. speed
• 2. speed
• NiCd 2.0 Ah
• NiCd 2.4 Ah
• NiMH 3.0 Ah
BPS 12
NiCd 2.4
492 268
12 V
2.4 Ah
0.73 kg (1.6 lbs)
TDK 12
12 V
0 – 430 rpm
0 – 1400 rpm
20 Nm
28 Nm
2 – 7 Nm
0.5 – 2.5 Nm
1.5 – 13 mm
14 mm / 25 mm
1/4 "
2.0 kg (4.4 lbs)
LC 45
120 V ~ / 60 Hz
7.2 - 18 V (DC)
max. 3 A
app. 0.06 A
app. 45 min
app. 50 min
app. 70 min
BPS 12 BPS 15.6
NiMH 3.0 NiCd 2.4
491 821 492 269
12 V 15.6 V
3.0 Ah 2.4 Ah
5 - 45 °C
by means of NTC thermistor
0.75 kg (1.7 lbs) 0.90 kg (2.0 lbs)
Cordless drills are suitable for drilling metal,
wood, plastics and similar materials, as well as
tightening and screwing in screws (into wood,
up to a diameter of 6 mm).
The LC 45 battery charger is designed for
recharging the battery pack listed.
due to improper use.
3
TDK 15.6
15.6 V
0 - 450 rpm
0 - 1500 rpm
25 Nm
36 Nm
2 - 7 Nm
0.5 - 2.5 Nm
1.5 - 13 mm
16 mm / 35 mm
1/4 "
2.3 kg (5.1 lbs)
BPS 15.6
NiMH 3.0
491 823
15.6 V
3.0 Ah
0.92 kg (2.0 lbs)

Intended use

The user will be liable for damage