Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3 EN-US English
10. Touch-screen LCD.
11. Power indicator.
12. On/off button.
3.12 Screen elements
See Figure 2.5 Screen elements, page 4.
1.
Programmable button P4.
2.
Programmable button P3.
3.
Digital zoom factor.
4.
Result table.
5.
Status icons.
6.
Measurement tool (e.g., spotmeter).
7.
Temperature scale.
8.
Menu system button.
3.13 Menu system
See Figure 2.6 Menu system, page 5.
1.
Recording mode button.
2.
Measurement parameters button.
3.
Image mode button.
4.
Measurement button.
5.
Color button.
6.
Settings button.
7.
Main menu.
8.
Submenu.
3.14 To keep in mind
•
Adjust the focus first. When the camera is out of focus, the measurement will
be wrong.
•
By default, most cameras adapt the scale automatically. Use this mode first,
but do not hesitate to set the scale manually.
•
A thermal camera has a resolution limit. This depends on the size of the de-
tector, the lens, and the distance to the target. Use the center of the spot tool
as a guide to the minimum possible object size, and get closer if necessary.
Make sure to stay away from dangerous areas and live electrical components.
•
Be careful when holding the camera perpendicular to the target. Be observant
of reflections, especially at low emissivities—you, the camera, or the sur-
roundings may become the main source of reflection.
#T810138; r. AB/47238/47238; mul
10
Publicidad
Tabla de contenido
