Waring Commercial WCO500E/K Manual Del Usuario página 17

Installing and Replacing Oven Light
A. Removing the Oven Light Cover
Tab of Oven Light Cover
Slot of Oven Light Compartment
1. Insert a Phillips-head screwdriver into the slot in
the screw that holds the oven light cover in place.
2. Rotate the screwdriver counterclockwise to
remove the screw.
3. Remove the oven light cover.
B. Install or Replace the Oven Light
Use a clear appliance light bulb or contact your local
distributor.
C. Replace the Oven Light Cover
1. Insert the tab of the oven light cover into the slot in the
side of the oven light compartment.
2. Insert the screw into the hole in the oven light cover.
3. Holding the screw, push the oven light cover toward the
side of the oven until the screw enters the screw hole.
4. Turn the screw clockwise by hand until the threads start
to engage.
5. Insert the screwdriver in the slot of the screw.
6. Tighten the screw by turning the screwdriver clockwise.
17
Phillips Head Screw
Oven Light Cover