Vornado ® Vortex Action; Getting Started; Remote Control Quick Start Guide; Advanced Safety Features - Vornado TVH600 Guia Del Propietario

Trust.
It is said that trust isn't given, but earned. For decades Vornado has
been earning the trust of our customers by offering them only the
best. Vornado provides the highest level of performance, coupled
with the highest level of support available. Complete satisfaction
with no exceptions – this is Vornado's promise to you. If you are
not satisfied for any reason, please contact us. Knowledgeable
representatives are available at 1-800-234-0604 from 7:00 AM to 6:00
PM CST. A wealth of additional support is also available online at
www.vornado.com. On behalf of myself and the entire staff at our
Andover, Kansas headquarters – thank you for selecting Vornado.
Sincerely,
Bill Phillips
CEO, Vornado Air
Find our complete product line at www.vornado.com
6 English
Vornado Vortex Action
®
ordinary heater Vornado Whole
Without Adequate Room heater
Heat Circulation With Signature
Vortex Heat
Circulation
82º
72º
82º 72º
82º
72º
62º
tVh600
tVh600
Ordinary heaters provide only localized heat. Heat immediately rises to
the ceiling, resulting in cold and hot spots in the room. Vornado's unique
Vortex Action delivers continuous, uniform heat surrounding everyone in
the room in a warm, comfortable temperature.

Getting Started

Remote control Quick Start Guide

1. Remove static cling decal from the Heater Touch Screen Display.
2. Plug Heater into approved wall outlet. DO NOT turn Heater on.
3. Place 2 AA batteries (included) into Remote. Aim Remote at Heater.
Recommended to be within 3 feet for programming the Heater.
4. Press and hold the Remote POWER button for approximately
3 seconds, until display flashes one time. The Remote now has
generated a new communication signal.
5. Press and hold the Heater POWER button for approximately 3
seconds, until the display begins to flash. The Heater is now ready to
receive the new communication signal.
6. Press the Remote Mode button one time. The Heater display will
stop flashing and glow solid. The Remote and Heater are now linked.
7. Set the Heater to desired heat setting, temperature setting and timer
duration. The Remote does not need to be programmed for the
Heater to function properly using only the main touch-screen display.
Note: You should only need to set up the connection one time
upon first use of your Heater. If for some reason the Remote loses its
connection – repeat the Remote Control Quick Start Instructions.
ReMote heateR diSPLaY
PoWeR Button PoWeR Button Mode Button
Press and hold Press Once
Press and hold
for 3 seconds for 3 seconds

Advanced Safety Features

Tight Grill Spirals
Resists curious fingers.
Cool Touch Case
Safe to touch, even on high heat setting.
Automatic Safety Shut Off System
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
Tip-Over Protection
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
Ideal 120°F Exit Air Temperature
Warm enough to heat an entire room.
ReMote Grounded Heavy-Duty Power Cord
Adds durability and a more secure wall connection.
English
7