Schumacher Electric PID-200 El Manual Del Propietario página 4

maximum 200 watts can exceed the inverters surge capa-
bility and cause an automatic overload shutdown.
Make sure the device you are using is compatible with a
modified sine wave inverter.
How to use the 12 Volt Accessory Plug:
1. Place inverter on flat surface. Make sure the AC outlet,
the ON/OFF switch and USB port are easily accessible.
The 12 Volt accessory cable and plug should face toward
the 12 Volt accessory outlet.
IMPORTANT: Keep inverter well-ventilated and away
from liquids and moisture at all times.
2. Make sure the ON ( I ) and OFF ( 0 ) rocker switch is in
the OFF ( 0 ) position.
. If necessary, remove the cigarette lighter from its outlet.
Push the 12 Volt power plug firmly into the 12 Volt
accessory outlet. The LED indicator light should glow
GREEN verifying the inverter is receiving power.
4. Make sure the device to be operated is OFF. Plug the
power cord of the device into the inverter's AC outlet.
5. Turn the inverter rocker switch to the ON ( I ) position.
Turn the device ON.
6. To disconnect, reverse the above steps.
OPERATING INSTRUCTIONS
4