Schumacher Electric PID-200 El Manual Del Propietario página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Device demands more than 200 Watts continuous
power.
Cycle inverter power OFF and ON.
If problem persists, use a larger inverter or a smaller
device.
6. Inverter is too hot.
Increase ventilation to inverter.
Move inverter to a cooler area.
Reduce the power consumption of the device.
PROBLEM: Inverter Does Not Turn On
Reason/Solution
1. Poor contact at terminals.
Unplug and reinsert PID-200.
2. Fuse is blown.
A blown fuse is usually caused by reverse polarity or
a short circuit within the inverter. To replace, contact a
qualified service technician who will diagnose the inverter
and replace the fuse with the appropriate replacement.
3. Inverter may be defective.
See warranty and call Customer Service 800-621-5485
(Hours: 7 a.m. – 4:0 p.m. CST).
9

Publicidad

Tabla de contenido
loading

Tabla de contenido